Have you ever let go your mooring and found the boat won’t steer or move because the propeller is encased in a ball of marine growth? This is an extreme case, but even slight fouling on your prop can lead to slower speed, corrosion and less fuel efficiency. These products help prevent such problems.
Propspeed keeps running gear and any other underwater metals free of marine growth and protected against corrosion for improved performance. It is best used on propellers, shafts, struts, rudders, trim tabs, keel coolers, bow and stern thrusters, pod drives, sail drives and other underwater metal.
IN THE KIT: Propclean – denatured alcohol ensures metal is free of contaminants. Propprep – critical chemical preparation of metal surface to be coated. Etching Primer Base and Etching Primer Hardener to apply before finishing with Clear Cote non-toxic, slick topcoat that marine growth cannot adhere to.
Stripspeed removes foul-release coatings in 30 minutes or less (*Ideal temperature 15-27° C (60-80° F). Thick consistency is easy to use on vertical or overhead surfaces with no mixing required. Just shake, pour, and go. It is non-flammable, non-caustic, DCM and NMP free and doesn’t cause mechanical wear through multiple refits or create toxic dust/debris.
Underwater lights are susceptible to marine fouling that can result in reduced visible light, and efforts to remove barnacles can result in damaged lighting components. Lightspeed’s transparent coating can reduce maintenance and preserve lighting system performance.
Foulfree is a clear, foul-release coating for transducers. Fouling on the face of transducers can reduce their sensitivity, bottom-echo returns, and positive fish targets. Foulfree keeps transducers clean and operating well for the clearest sonar images possible.
Trilux 33 is a premium, tin-free antifouling for Aluminium / Zinc-Galvanized Steel, GRP / FRP, Lead, Steel, and Bronze / Stainless Steel substrates. With added Biolux® Technology for long-lasting antifouling protection, its slow polishing formula is suitable for use on aluminium craft, outdrives and outboards in all waters.
Pacifica Plus is suitable for sailing yacht or powerboat hulls, propellers and outdrives in sea/fresh/brackish water on Aluminum / Zinc-Galvanized Steel, GRP / FRP, Lead, Steel, and Bronze / Stainless Steel substrates. A copper free ablative antifouling with Econea™ for barnacle and shell control, and Biolux Slime blocking technology.
Seajet Peller Clean is an environmentally friendly foul release coating to keep propellers, stern gear, and outboards free from fouling. It uses silicon to provide a ultra-slippery surface that fouling finds difficult to adhere to. The box set comes with primer, finish, manual, gloves, and brushes.
PropGlide™ is a foul-release coating that when applied to your propeller(s) and running gear will increase fuel efficiency and the performance of any vessel. This super slick coating keeps your propellers clean from marine growth for extended periods of time. Contents: Primer Base 60 ml, Primer Hardener 15 ml, Clear TopCoat 100 ml.
